Many men are unhappy with the parameters of their sexual body and do not want to deal with it.Therefore, different methods are used to help the penis thicker and long.A device as a pump to increase a member is also widely used.
The principle of operation of the device
The procession is a cylindrical device.The device is designed to increase a man's penis in length and width, as well as to increase erection.
The pump works according to a simple beginning.When used around the male penis, pressure occurs, which helps to increase blood flow, fills the cave bodies with blood.The same is true of an erection.The penis becomes very hard, swelling, which allows you to increase its parameters.
Pump varieties
The pump has only one structure of the structure to increase the penis.It is a transparent bottle that depicts centimeters.There are also devices that create a gap and maintain the necessary pressure.
There are three types of pumps:
- Handbook.The gap is created using a piston or pear.Such devices have a lower cost, so they are often used.However, men have to wait for a long time for their use for their use.
- Automatic.In this type of pump, the pressure on the bottle is created thanks to the electric pump, which is already embedded in the device.For his work, you need to enter batteries.Automatic devices are more preferable as they are high performance, allow you to control pressure and absorption.
- Water.The newest type of pump.Differs in this water used instead of air.Such a variety of increased, effective, has few contraindications and serves much more than previous models.
Pomping is done in two ways.The first is called packaging.Its essence is to stretch the tunic and an increase in the penis in length, but not in width.To do this, use a narrow bottle in which the penis cannot swell on the sides, but will stretch.
The second method is classic pumping.In this case, a broad bottle is used, in which the penis has the opportunity to swell in all directions.This allows you to increase the width and length of the instrument.
During exercises, safety precautions must be observed.
Selection criteria
The lover pump is selected taking into account the size of the penis and the purpose of its use.Experts advise the following:
- The length of the device must be more than 3 cm.
- The width should be more than the diameter of the penis per 2 cm.
- For beginners, it is recommended to choose a manual type of device, as it is the simplest.
The above dimensions of the member are only taken into account in a state of excitement.
During the purchase process, it is worth paying attention to the materials from which the increased increased.The bottle must be strong enough to prevent random damage to the male organ.
Contraindications
It is not allowed to use a vacuum increase in men suffering from the following pathologies:
- Thrombosis.
- Fibrosis.
- Liver diseases.
- Kidney disease.
- Diabetes.
- Pathologies of the heart and blood vessels.
- Sexually transmitted diseases.
- Dignity in the work of Unuveniar.
If a person is not sure he can use a pump to increase the length and width of the penis, then it is worth visiting the doctor for examination.
Pros and cons
The vacuum pump allows men not only to make their dignity longer and wider.The device also helps to improve erectile function, to extend sexual intercourse by reducing the sensitivity of the organ.In addition, the device allows you to adjust the shape of the penis, even in the presence of curvature.
The negative sides of the pump are manifested only by its inappropriate use.Non -compliance with instructions implies many unpleasant consequences.
The effect of use
If you are constantly using the pump, then after 6 months the penis will change its size forever.To achieve the maximum result, it is recommended to take drugs that increase the production of sexual hormones in men.But this can only be done after consulting a doctor.
It is worth knowing that a pump and a pump to increase the penis is the one and the same.
They, then have already tried the pump, note that they were able to achieve the desired result.Six months later, penis length increases by 3 cm and thickness - by 2 cm.
Instructions for use
To use a vacuum pump to increase the penis, no special skills are needed.Before the procedure, the device should be treated with lubrication to ensure slipping.
A male member is obliged to lubricate with a special cream, the result of which allows us to smooth the flow of blood, to boost a rush of blood in the penis.
Then place the genitals on the cylinder.Eliminate the air from the bottle to create a vacuum environment.Once redness occurs, it is necessary to wait 30 seconds and start the air.The procedure should not take more than 15-20 minutes.
Possible consequences
There is no doubt that a special order was created to use the pump.Applying all manipulations strictly avoids adverse consequences.But sometimes men neglect the rules.
As a result, instead of the desired centimeters, they receive the following:
- The appearance of a swollen ring at the base of the penis head.This is due to the stagnation of the lymphatic fluid.This phenomenon can occur even with the proper use of a vacuum device.If this side effect is observed, you should stop using the device.
- Penis swelling due to the influx of large quantity of lymph nodes.
- Deterioration of erectile function.
- Penis redness, the appearance of bleeding.
- Thrombosis.The disease is a huge threat to human life, but when the use of the pump is extremely rare.
So that there are no negative consequences, it is important not only to use the pump properly.It is also necessary not to ignore the presence of contraindications for its application.If it is, then you should look for other penis growth methods.
Homemade appliances
For men who do not want to spend money on buying a factory growth, it is possible to make home with their hands.
From the manicate pump
In order to create an air -free environment, it is necessary to promote the sleeve pump, turn the cuff with your back.Then you need to assemble the device again, but already in the reverse order.
Then you need to make a valve designed to get out of excess air.For this purpose, you can apply the valve from the aquarium compressor.It must be attached to an appropriate hose and sealing.
By the compressor
You can get the compressor from unnecessary cooling equipment.After the evaporator and capacitor export, the pipes with which they are connected must be cut.After that, connect the compressor to the network.
In any store for motorists, take an air filter.Must be connected to the compressor's hole.The filter should be attached to the rubber tube of the required size.Then it only remains to try the effect of the device.
The pump helps, but the use of drugs containing testosterone or the use of an extension using a pump gives a greater effect on the use of a pump.
Using a syringe
Take a plastic tube, cut the three parts, the size of each one must be 10 cm.Connect them to the t -shirt.The result is a tea of three bastards.
To the central retirement to attach a syringe nose.On the bends, install valves.
It is important to open the second means.In order not to be confused in the future, you need to design arrows that will indicate the air direction.
Using plastic bottles
A rather simple pump to increase penis can be created by ordinary plastic bottles.It is only important to choose a different container size.The bigger one must cut the top to make the shape of the cylinder.
At the bottom of the second bottle, make holes and place it in the first container.It is important not to form a large gap between the walls.Then you have to attach the hose to a large container.You can get it from the pump to pump the wheels to the bike.
Care for the device
In order to maximize life span, it is necessary to take care of it properly.If the device is only purchased and has not yet been used, then it is necessary to rinse it thoroughly with soap and then dry and process with any antiseptic.Then wash the device after each use.
You cannot heal the pump with hydrogen peroxide or boiling water, as well as use grease with fats during the lubricant process.Otherwise, the risk of damage is high.